Difference between revisions of "Pinouts"

From PhatHack Wiki
Jump to navigation Jump to search
 
 
Line 1: Line 1:
 
[[Category:Specs]]
 
[[Category:Specs]]
  +
  +
'''NOTE: http://www.phathack.com/pinouts.html contains the same data at the time of writing and includes inline images'''
  +
 
Currently the only info I have is for Keg<->PhatBox, VW<->PhatBox and BMW(Blitzsafe)<->PhatBox<BR>
 
Currently the only info I have is for Keg<->PhatBox, VW<->PhatBox and BMW(Blitzsafe)<->PhatBox<BR>
 
Please note that these pinouts could be incorrect, I personally mapped out the music keg so am relatively sure that is correct but the BMW and VW information is from a third party. I am not responsible for any damage that could be caused by the use of this information.<BR>
 
Please note that these pinouts could be incorrect, I personally mapped out the music keg so am relatively sure that is correct but the BMW and VW information is from a third party. I am not responsible for any damage that could be caused by the use of this information.<BR>

Latest revision as of 22:55, 9 January 2006


NOTE: http://www.phathack.com/pinouts.html contains the same data at the time of writing and includes inline images

Currently the only info I have is for Keg<->PhatBox, VW<->PhatBox and BMW(Blitzsafe)<->PhatBox
Please note that these pinouts could be incorrect, I personally mapped out the music keg so am relatively sure that is correct but the BMW and VW information is from a third party. I am not responsible for any damage that could be caused by the use of this information.

Feel free to email me if you see any problems or need clarification at sam@bingner.com

The Phatbox end of a cable is 3M Part#10126-3000VE or 10126-6000EC and can be ordered from: HERE or HERE respectively The MBUS Connector should be: Kobiconn 8PIN DIN PN#171-0278

General PhatBox Info

Pin Definitions

PhatBox Pins (Verified for Kenwood, VW and BMW)

Pin Function
1 Left Audio +
2 Right Audio +
3 Audio Ground
4, 16 Ground
10, 13 VCar
14 ACC

Music Keg

Ordering

Pinouts

Kenwood CD-Changer interface info from http://www.mictronics.de/?page=cdc_proto#Kenwood pin/direction/description

  1. IN/OUT - CH_CLK - Clock input/output for changer
  2. IN - Audio left channel
  3. OUT - CH-DATAH - Data output to changer
  4. IN - CH-DATAC - Data input from changer
  5. IN - CH-REQC - Request input from changer; "Low" : Request
  6. IN - Audio right channel
  7. OUT - CH-RST - Reset output to changer
  8. AGND - Audio Ground
  9. IN - CH-MUTE - Mute request from changer; "High" : Mute
  10. OUT - CH-CON - Changer control; "High" : Operation mode "Low" : Standby
  11. Vcc +12V
  12. Ground
  13. OUT - CH-REQH - Request output to changer; "Low" : Request

PhatNoise/Sony

Pinouts

PhatNoise/BMW (Blitzsafe)

General

Pinouts

MBUS Pins (BMW Side)

  1. ACC (+12V)
  2. Ground
  3. Right Audio +
  4. Audio Ground
  5. Left Audio +
  6. DATA
  7. VCar (+12V)
  8. Ground

PhatNoise/VW

Pinouts

Audi

General

I will be updating this page at some time to mirror the information in my own format, assuming I get the permission of the author